Key Specs |
Current Model |
| Working width | 8.3 m
27.5 ft |
| Transport width | 4.8 m
15.5 ft |
| Operating depth | Maximum
40.6 cm
16 in.
|
| Miles per hour | 6.4-11.2 km/h
4-7 mph |
| Horsepower per standard | 29.8-44.7 kW
40-60 hp |
| Spacing between standards | 76.2 cm
30 in. |
Tool configuration | |
| Type | In-line ripper |
| Option 1 | |
| Option 2 | |
| Option 3 | |
| Option 4 | |
| Option 5 | |
| Option 6 | |
| Option 7 | |
| Option 8 | |
| Option 9 | |
| Option 10 | |
| Option 11 | |
| Option 12 | |
| Option 13 | |
| Option 14 | |
| Option 15 | |
| Option 16 | |
| Option 17 | |
| Option 18 | |
| Option 19 | |
| Option 20 | |
| Option 21 | |
| Option 22 | |
Working width | |
| Option 1 | |
| Option 2 | |
| Option 3 | |
| Option 4 | |
| Option 5 | |
| Option 6 | |
| Option 7 | |
| Option 8 | |
| Option 9 | |
| Option 10 | |
| Option 11 | |
| Option 12 | |
| Option 13 | |
| Option 14 | |
| Option 15 | |
| Option 16 | |
| Option 17 | |
| Option 18 | |
| Option 19 | |
| Option 20 | |
| Option 21 | |
| Option 22 | |
Transport width | |
| Option 1 | |
| Option 2 | |
| Option 3 | |
| Option 4 | |
| Option 5 | |
| Option 6 | |
| Option 7 | |
| Option 8 | |
| Option 9 | |
| Option 10 | |
| Option 11 | |
| Option 12 | |
| Option 13 | |
| Option 14 | |
| Option 15 | |
| Option 16 | |
| Option 17 | |
| Option 18 | |
| Option 19 | |
| Option 20 | |
| Option 21 | |
| Option 22 | |
Operating depth | |
| Maximum | 40.6 cm
16 in. |
Frame | |
| Size | 152x152x9.5 mm
6x6x0.35 in. |
| Maximum underframe clearance | 89 cm
35 in. |
Operating speed | |
| Miles per hour | 6.4-11.2 km/h
4-7 mph |
Horsepower required | |
| Horsepower per standard | 29.8-44.7 kW
40-60 hp |
Depth control | |
| Option 1 | |
| Option 2 | TruSetâ„¢ in-cab controls and single-point crank-adjust |
| Option 3 | |
Hydraulic requirements | |
| Option 1 | Drawn: 1 SCV (lift) at 17,237 kPa
2500 psi |
| Option 2 | 1 SCV (fold) at 17,237 kPa
2,500 psi |
Hitch | |
| Options | Drawn |
| Three-point hitch requirements | |
| Pull-type description | Category 5 Hitch |
Standard options | |
| Spacing between standards | 76.2 cm
30 in. |
| Option 1 | Trip force
Shear-bolt: 3,265 kg
7,200 lb
Standard type
Straight with wear shin: 19 or 31.75 mm
0.75 or 1.25 in.
Shear-bolt |
| Option 2 | Trip force
1,451.5 kg
3,200 lb
Trip height
30.5 cm
12 in.
Standard type
19 mm
0.75 in.
Cushion trip |
| Option 3 | |
| Option 4 | |
Ground-engaging components | |
| Options | Standard: 19 mm (0.75 in.)
min-till point: 178 mm (7 in.)
low-disturbance: 254 mm (10 in.)
ultra-low-disturbance: 63 mm (2.5 in.)
Standard: 31.75 mm (1.25 in.)
Regular: 57 mm (2.25 in.)
Capped: 57 mm (2.25 in.)
Double-capped: 57 mm (2.25 in.)
LaserRip points: 70 mm (2.75 in.), 127 mm (5 in.), and 178 mm (7 in.) |
Coulters | |
| Description | |
| Type | Spring cushion coulters |
| Pounds of force | Normal working load: 272.2 kg
600 lb
Deflection of: 10.2 cm
4 in.
Maximum trip load: 362.9 kg
800 lb
Deflection of: 20.3 cm
8 in. |
| Blades | Straight or rippled: 559x4.5 mm
22x0.1777 in. |
Closing wheel attachment | |
| Description | |
| Down force | 113.4 kg
250 lb |
| Size | 10.2x40.6 cm
4x16 in. |
| Spacing | 19.05 to 35.6 cm
7.5 to 14 in. |
| Angle adjustments | 1 to 15 degree (angle) |
Stabilizer/gauge wheels | |
| Type | Four Stabilizer wheels |
| Wheels | 52.1x20.3 cm
20.5x8 in. |
| Tires | 10 PR |
Pull-type wheels | |
| Description | VF320/70R15 Radial tire |
| Additional feature | |
| Option 1 | |
| Option 2 | |
| Option 3 | |
| Option 4 | |
Additional information | |
| Date collected | |